Resetting EC100 Controller

1. Unplug Ethernet cable at the top left of the EC100.
2. Remove the USB adapter.
3. Turn off power either at toggled disconnect or at breaker indicated on front of the EC100 enclosure.
4. After all lights are off on the controller, wait 5 minutes before restoring power.
5. Reinsert the USB adapter and ethernet cables.
6. On controller startup, the following should be the observed LED sequencing:
   1. Controller startup initiated.
   2. Red LED OFF, Blue LED ON for 15 seconds.
   3. Blue LED OFF, Red LED ON for 10 seconds.
   4. RED LED OFF, Blue LED 5 quick pulses.
   5. Blue LED OFF, Red LED 20 quick pulses.
   6. Red LED OFF, Blue LED OFF for 35 seconds.
   7. Blue LED pulse (normal heartbeat pulse indicating startup complete and controller is running normally).
   8. Red LED will be OFF, then change to ON when controller connects to server.