Systems - GridPoint Intelligence - Humidity Mitigation Setup Guide
This article provides the steps to setup Humidity Mitigation across your GridPoint Intelligence sites.
Table of Contents
What is Humidity Mitigation?
Humidity Mitigation section allows for customization of the humidity mitigation feature. Humidity mitigation can be toggled on, off, or inherited from the current Comfort Setting.
When indoor humidity hits 65% RH, Humidity Mode automatically adjusts cooling to bring humidity down without overcooling. It will pause if:
- Outdoor temp drops below 60°F
- Zone is already at or below 69°F
- A cooling fault is active
- Humidity hasn't dropped after 1 hour
- Zone temp drifts 2° above setpoint
Initial Setup
- To turn on Humidity Mitigation, navigate to the Settings Library from the sidebar menu.
- Open the setting you want to update, or create a new setting. To turn Humidity Mitigation on or off, click the OFF/ON toggle for each scheduled mode (Primary, Secondary, Closed).
Applying Comfort Settings with Humidity Mitigation to Assets
Follow the instructions for setting up Comfort Settings in the Overview - Settings Library article. This document provides steps for individual asset and bulk application of Humidity Mitigation settings.