Systems - GridPoint Intelligence - HVAC Health Tests
This article will provide the steps required to properly run HVAC Health Tests, also known as heat and/or cool tests. These tests can also be scheduled to repeat as needed.
Table of Contents
Scheduling HVAC Health Tests
Important: When running HVAC Health Tests, always use the scheduler. Do NOT apply new comfort settings to a site or asset to run a test. This can permanently change the schedule and cause discomfort issues for the site.
- Login to GridPoint Intelligence.
Individual Asset Scheduling
- Click the Sites button on the lefthand sidebar.
- Click on the HVAC Tests Page button for the desired HVAC asset.
- After clicking ‘Schedule HVAC Test’, you will be brought to the asset or assets HVAC Test Page.
- Click the ‘Set Up HVAC Test’ button.
- After clicking ‘Set Up HVAC Test’, you will see the test setup pop-up window.
- Fill the information out as desired.
- Click heating, cooling or both to run the corresponding tests.
- Choose the date and time.
- Select if you wish for this test to repeat (Do not repeat or annual).
- Determine if you want to ignore outdoor conditions at the time of the test to allow it to run.
- Fill the information out as desired.
- Click Submit.
HVAC Health Tests last 30 minutes per test (i.e. 30 minutes for Cooling and 30 minutes for Heating)
Bulk Asset Scheduling
- Click the Assets button on the lefthand sidebar.
- In the Filter Assets dropdown, select ‘Show HVAC Assets’.
- Select the site asset or assets to schedule the HVAC Health Test using the checkboxes.
- Click ‘Apply Bulk Action’.
- Click ‘Schedule HVAC Test’
- After clicking ‘Schedule HVAC Test’, you will see the test setup pop-up window.
- Fill the information out as desired.
- Click heating, cooling or both to run the corresponding tests.
- Choose the date and time.
- Select if you wish for this test to repeat (Do not repeat or annual).
- Determine if you want to ignore outdoor conditions at the time of the test to allow it to run.
- Fill the information out as desired.
- Click Submit.
